Stainless Steel V4 Borewell Submersible Pump set (Oil Filled) - Confirming to IS 8034 : 2002
Specification
Power Range | 0.5 HP -5.0 HP in 1 Phase |
Version | 220-240V, 50 Hz, A.C.-1 Phase,
|
Speed | 2880 rpm. |
Discharge Range | 23 - 250 in 1 Phase |
Head Range | 42 - 200 mtr in 1 Phase |
Outlet size | 25, 32, 40 & 50 mm |
Degree of Protection | IP 68 |
Maximum Outer Diameter | 98 mm |
Duty | S1 (Continuous) |
Method of starting | In 1 Phase - Capacitor start and run (CSR) In 3 Phase - DOL / Star Delta |
Mounting Standard | As per NEMA |
MOC Pump
NRV Housing | Stainless Steel |
Check Valve | Stainless Steel |
Check Valve Sheet | NBR |
Impeller | Stainless Steel |
Bowl | Stainless Steel |
Pump Shaft | SS 431 |
Suction inter Connector | Stainless Steel |
Coupling | SS 410 |
MOC Motor
Upper, Lower Housing & Motor Base | Cast Iron / Stainless Steel |
Stator Shell | Cast iron / SS |
Shaft | Stainless Steel |
Bearing | Anti frictional deep groove ball bearing |
Thrust Set | Carbon V/s SS in water filled |
Application in :
OSWAL PUMPS LTD.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |